Home  | Introduction  | Products  | Product equipment  | Feedback  | Contact  | ÖÐÎÄ°æ
 4"membrane housing
 
 8"membrane housing
¡¡
 4"end, side port membrane housing
¡¡
 8" end opening membrane housing
¡¡
 8" side opening membrane housing
¡¡
 membrane housing of seawater desalination
¡¡
 membrane housing of Noruite ultrafiltration
¡¡

 Flowmeter
¡¡
 Introduction to membrane housing subassembly
¡¡
 combined diagram of membrane housing phead
¡¡
 product size
¡¡
 Application of Pengyu's products
¡¡
 Policy of quality
 
   Location:product

   membrane housing of seawater desalting

Pressure of work

 Qty of section

L mm

D1 Mm

S   mm
6.9MPa 1 1516 236 711x1
2 2532 236 1422x1
3 3548 236 2032x1
4 4564 236 1626x2
5 5580 236 1981x2
6 6596 236 2337x2

L: length of pressure container, different from the specification and quantity of film element.
D1: OD of pressure container
S: supporting span of pressure container

 
Marked number

Qty

Name of part

Material/remarks

1 1 Pressure case epoxy gfrp/fiber twisted
2 2 side port 316 stainless steel
3 2 tight nut ABS
4 1 thrust ring ABS
5 2 ¡°O¡±- ring silicone rubber
6 2 pressure withstood plate aluminum alloy
7 2 retaining ring 304 stainless steel
8 2 adaptor ABS
9 4 seal ring of adaptor silicone rubber
10 2 pedestal synthetic rubber
11 2 hoop strip stainless steel strip
12 4 nut of hoop strip 304 stainless steel

Technical requirements:
    The fabricating method of membrane housing should be in accordance with JC692-1998;
    The design pressure of membrane housing is 1000PSI and the permitted scope of work temperature is £­7¡æ~49¡æ
    The leakage test of membrane housing adapts hydraulic test. The test pressure is 1.2 times of the design pressure.